RF Coax Connectors
OSP Miniature Modular Blind Mate Connectors
Product Facts
■
Interface designed for
multiple interconnects
■
For high performance
microwave system
requirements
■
Module to module, module
to motherboard, fixed and
float mount
■
Bulkhead or panel mount
■
For flexible and semi-rigid
cable
OSP miniature connectors
for semi-rigid cable meet
high performance requirements for microwave
multiple interconnects.
Standard units are available
in bulkhead or panel mount
designs for either direct
solder or solderless compression crimp attachment.
Complete tooling for both
versions is located in the
Tooling Section of this
catalog.
Jack connectors are available in either float or rigid
mount. Rigid mount units will
function to specifications up
to ±.10 [.004] radial misalignment with the mating
plug connector. Applications
requiring greater than ±.10
[.004 ] radial misalignment
can use either the float
design or floating connector
plates with guide pins.
high performance requirements for microwave system applications. The cable
attachment is permanent
and highly reliable.
Ease of assembly permits
users unskilled in soldering
techniques to rapidly produce cable assemblies with
consistently excellent
mechanical and electrical
performance.
The solderless compression
crimp attachment meets
157
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
OSP Miniature Modular Blind Mate Connectors (Continued)
The specifications given
refer specifically to mated
pair of Part Numbers
1059410-1 and 1059402-1
(RG 402) and 1059412-1
and 1059404-1 (RG 405).
Specifications on other connectors are available on
request.
The general electrical,
mechanical and environmental specifications in the
following table are recommended for procurement
documents or drawings.
Engineering Data
Impedance —
Frequency —
Temperature Rating —
50 ohms
dc to 22.0 GHz
-65° to 125° C
Electrical
RG 402 (.141) Semi-Rigid
RG 405 (.085) Semi-Rigid
1.02 + .005f (GHz)
1.02 + .008f (GHz)
-.03 x √ f (GHz)
5,000 megohms min.
1.05 + .005f (GHz)
1.05 + .009f (GHz)
-.03 x √ f (GHz)
5,000 megohms min.
VSWR —
dc - 18.0 GHz
18.0 - 22.0 GHz
RF Transmission Loss —
Insulation Resistance —
Contact Resistance —
Center Contact
Outer Contact
Outer Contact to Cable
Dielectric Withstanding Voltage —
Corona Extinction Voltage at 70,000 Ft.—
RF High Potential at 5 MHz —
RF Leakage Interface Only —
Power Handling —
2.0 milliohms max.
2.0 milliohms max.
2.0 milliohms max.
2.0 milliohms max.
0.5 milliohms max.
0.5 milliohms max.
1500 volts RMS
1000 volts RMS
375 volts min.
335 volts min.
1,000 volts RMS
670 volts RMS
-(90-fGHz) dB min. (fully mated)
-(90-fGHz) dB min. (fully mated)
300W at 3 GHz (sea level) and room temperature
Environmental
Corrosion —
Vibration —
Shock —
Temperature Cycling —
Moisture Resistance —
Method 101, Condition B, MIL-STD-202
Method 204, Condition D, 20G’s, MIL-STD-202
Method 213, Condition I, 100G’s, MIL-STD-202
Method 107, Condition B, MIL-STD-202
Method 106, MIL-STD-202
Material
Housing —
Center Contact —
Dielectric —
Gasket (O’Ring) —
Corrosion resistant steel Type 303 (stainless) per ASTM A484 and A582
Beryllium copper per ASTM-B-196
TFE fluorocarbon per ASTM-D-1457
MIL-P-25732
Mechanical
Force to Engage —
Force to Disengage —
Center Contact Retention —
Durablilty —
Radial Misalignment —
Rigid Mount
Float Mount
3 pounds max.
1.5 pounds max.
6 pounds min.
5,000 Cycles
±.10 [±. 004]
±.51 [±.020]
Mating Characteristics
Jack Connector —
Center Contact Socket
Insertion Force
Withdrawal Force
Oversize test Pin —
Test Pin Finish —
Insertion Depth —
Number of Insertions —
Test Pin —
Test Pin Finish —
Insertion Depth —
Insertion Force —
Test Pin —
Test Pin Finish —
Insertion Depth —
Withdrawal —
.945 + .003 [.0372 + .0001] dia.
16 micro inch
.76/1.14 [.030/.045]
3
.940 + .003 [.0370 + .0001] dia.
16 micro inch
1.27/1.91 [.050/.075]
3 pounds max.
.90 + .003 [.0355 - .0001] dia.
16 micro inch
1.27/1.91 [.050/.075]
1 ounce min.
Finish
Center Contact —
Housing —
Gold plate per MIL-G-45204, Type II, Class 1 over copper plate per MIL-C-14550
Gold plate per MIL-G-45204, Typ II, Class 0 over nickel plate per QQ-N-290, Class 2
or passivate per ASTM-A380
All dimensions shown are nominal.
Contact the factory for specific
tolerances.
158
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
OSP Miniature Modular Blind Mate Connectors (Continued)
Interface Mating Dimensions
The connector interface,
specifically designed for
multiple interconnects, maintains reliable performance
over the typical mechanical
tolerance required in cost
effective packaging.
The interface test data
shows excellent performance is maintained with mating gaps up to 0.38 [.015].
Meets MIL-STD-348 Figure
321. Intermateable to BMA
Connectors.
Jack
Letter
A
B
C
D
E
F
Dimensions
1.78
.070 Nom.
5.72
.225 Min.
7.62 Ref.
.300
5.00 Nom.*
.197
5.08
.200 Max.
3.23 Max.*
.127
Plug
Letter
A
B
C
D
E
F
Dimensions
1.78
.070 Nom.
5.33
.210 Nom.
7.62 Ref.
.300
5.05 Min.
.199
0.91
.036 Nom.
3.25 Min.
.128
*With spring bottomed
159
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
OSP Miniature Modular Blind Mate Connectors (Continued)
For Semi-Rigid Cable, Direct Solder Attachment
Bulkhead Feedthrough
Cable Plug
Rear Mount
7.9
Hex.
A
[.312]
Dia.
6.1 ± 0.03 Dia.
[.240 ± .001]
17.5
[.690]
ed
Cable
RG 402/U
3.58
.141
RG 405/U
2.16
.085
Bulkhead Feedthrough
Cable Jack Rigid
Rear Mount
9.19
Max.
[.362]
B
Dia.
6.1 + 0.03
– .000 Dia.
[.242 + .001]
– .000
Recommended
Mounting Hole
Dimensions
A
B
Plating
Part No.
Gold
3.7
.144
4.6
.180
1059402-1
Gold
2.3
.089
3.0
.120
1059404-1
6.4
A
Dia.
Dia. [.250]
11
[.43
11.1
Hex.
[.437]
18.0
[.710]
ed
ole
Cable
RG 402/U
3.58
.141
RG 405/U
2.16
.085
9.19
Max.
[.362]
B
Dia.
9.1 + 0.03
– .000 Dia.
[.359 + .001]
– .000
Recommended
Mounting Hole
Dimensions
A
B
Plating
Part No.
Gold
3.7
.144
4.6
.180
1059410-1
Gold
2.3
.089
3.0
.120
1059412-1
Flange Mount Cable Jack
Floating Rear Mount
0.10
2.6 +– 0.03
Dia.
+ .004 2 Holes
[.102 – .001 ]
14.2 ± 0.10
[.560 ± .004]
B Dia.
14.2
[.560]
OSP Jack
A
Dia.
Cable
RG 402/U
3.58
.141
RG 405/U
2.16
.085
19.1
Dia.
[.750]
0.25
9.5 +– 0.00
+ .010
[.375 – .000 ]
18.0
[.710]
9.6 + 0.05
– 0.03 Dia.
[.377 + .002]
– .001
9.5
[.372]
7.1
[.280]
Recommended
Mounting Hole
Dimensions
Part No.
A
B
3.7
.144
4.6
.180
1059453-1
2.3
.089
3.0
.120
1059456-1
Finish: Inner housing that is soldered to cable is gold plated. Outer housing is
passivated stainless steel.
When using semi-rigid cable, it is recommended that a service loop be used to
facilitate the float features of the connector.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
160
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
OSP Miniature Modular Blind Mate Connectors (Continued)
For Semi-Rigid Cable, Direct Solder Attachment (Continued)
Low Profile — Bulkhead
Feedthrough Cable Jack —
Floating Rear Mount
A
11.2 Dia.
Dia. [.440] Max.
9.3 ± 0.03 Dia.
[.365 ± .001]
16.2
[.640]
Cable
RG 402/U
3.58
.141
RG 405/U
2.16
.085
9.4 + 0.05
– 0.03 Dia.
[.368 + .002]
B
Dia.
– .001
Recommended
Mounting Hole
Dimensions
A
B
Plating
Part No.
Gold
3.7
.144
4.6
.180
1059505-1
Gold
2.3
.089
3.0
.120
1059506-1
When using semi-rigid cable, it is recommended that a service loop be used to
facilitate the float features of the connector.
Low Profile — Panel
Feedthrough Cable Jack —
Floating Rear Mount
7.6 Dia.
[.300]
A Dia.
18.0
[.710]
Cable
RG 402/U
3.58
.141
RG 405/U
2.16
.085
B
Dia.
Dimensions
A
B
Plating
Part No.
Gold
3.7
.144
4.6
.180
1059465-1
Gold
2.3
.089
3.0
.120
1059467-1
Recommended removal tool part number 1059774-1 is described in the
Tooling Section of this catalog.
When using semi-rigid cable, it is recommended that a service loop be used to
facilitate the float features of the connector.
Stand-Off C
Panel A
Panel
B
8.6 + 0.08
– 0.00
[.340 + .003]
8.0 + 0.05
– 0.00
[.316 + .002]
– .000
– .000
Panel
B
1.3 + 0.00
– 0.13
[.050 + .000]
– .005
Panel A ±.003
2.3
.090
2.3
.090
2.3
.090
3.2
.125
3.2
.125
3.2
.125
Panel B ±.003
9.5
.375
11.1
.438
12.7
.500
9.5
.375
11.1
.438
12.7
.500
Stand-Off Panel C +.050/–.000
7.2
.285
5.6
.222
4.1
.160
6.4
.250
4.7
.187
3.2
.125
Recommended Mounting Detail
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
161
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
OSP Miniature Modular Blind Mate Connectors (Continued)
For Semi-Rigid Cable, Solderless Compression Crimp Attachment
Bulkhead Feedthrough
Cable Plug
Fixed Rear Mount
7.9
A
Hex.
Dia. [.312]
6.1 ± 0.03 Dia.
[.240 ± .001]
d
6.1 + 0.03
– .000 Dia.
[.242 + .001]
9.19
Max.
[.362]
5.5 Dia.
[.218]
B
– .000
Recommended
Mounting Hole
Dim. B
Cable
Plating
Dim. A
Before
Crimping
After
Crimping
Part No.
RG 405/U
2.16
.085
Passivated
Stainless
Steel
2.2
.088
19.8
.782
17.2
.677
1059399-1
Outline drawing shows after crimp dimensions.
A
6.4
Dia. [.250] Dia.
Bulkhead Feedthrough
Cable Jack
Fixed Rear Mount
11
[.43
11.1
Hex.
[.437]
5.5
Dia.
[.218]
B
9.1 + 0.03
– .000 Dia.
[.359 + .001]
12.7
Max.
[.500]
– .000
d
Recommended
Mounting Hole
Dim. B
Cable
Plating
Dim. A
Before
Crimping
After
Crimping
Part No.
RG 402/U
3.58
.141
Passivated
Stainless
Steel
3.6
.143
21.1
.830
18.2
.715
1059408-1
Outline drawing shows after crimp dimensions.
Flange Mount Cable Jack
Floating Rear Mount
2.6 Dia.
[.102] 2 Plcs.
Dia.
9.5 Dia.
[.372]
5.5 Dia.
[.218]
19.1
Dia.
[.750]
9.6 + 0.05
– 0.03
14.2 ± 0.10
[.560 ± .004]
[.377 + .002]
– .001
Dia.
9.5
[.372
14.2
[.560]
B
A
Dia.
7.1
[.280]
9.7
[.380]
Recommended
Mounting Hole
Dim. B
Cable
Plating
Dim. A
Before
Crimping
After
Crimping
Part No.
RG 402/U
3.58
.141
RG 405/U
2.16
.085
Passivated
Stainless
Steel
Passivated
Stainless
Steel
3.6
.143
22.6
.891
19.8
.780
1059451-1
2.2
.088
22.6
.891
19.8
.780
1059452-1
Outline drawing shows after crimp dimensions.
When using semi-rigid cable, it is recommended that a service loop be used to facilitate the float features of the connector.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
162
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
OSP Miniature Modular Blind Mate Connectors (Continued)
For Flexible Cable, Crimp Attachment
6.9 ± 0.03 Dia.
[.240 ± .001]
Bulkhead Feedthrough
Cable Plug
Rear Mount
11.4
[.447]
ded
Hole
Cable
RG 174/U, 179,
187, 188, 316
6.9 ±
[.240
6.1 + 0.03
– .000 Dia.
[.242 + .001]
21.2
Ref.
[.833]
11
[.44
– .000
Recommended
Mounting Hole
34.9
Max.
[1.375]
Plating
Part No.
Passivated Stainless Steel
1059523-1
9.1 ± 0.03 Dia.
[.357 ± .001]
Bulkhead Feedthrough
Cable Jack
Rigid Rear Mount
6.4
[.250]
9.1 + 0.03
– .000 Dia.
[.359 + .001]
– .000
21.7
Ref.
[.855]
Recommended
Mounting Hole
35.6
Max.
[1.400]
Cable
RG 55/U,
142, 223, 400
Flange Mount Cable Jack
Floating Rear Mount
Plating
Part No.
Passivated Stainless Steel
1059525-1
2.6 Dia.
[.102] 2 Plcs.
Dia.
9.6 + .051
– .025 Dia.
[.377 + .002]
– .001
9.5
[.372]
Dia.
14.2
[.560]
21.7
Ref.
[.875]
19.1
[.750]
Dia.
7.1
[.280]
9.5
[.375]
Recommended
Mounting Hole
35.6
Max.
[1.400]
Cable
RG 55/U,
142, 223, 400
RG 174/U, 179,
187, 188, 316
RG 178,
Double Braid
Low Profile — Panel
Feedthrough Cable Jack —
Rear Mount
9.5
[.372
Dia
14.2 ± .102
[.560 ± .004]
Plating
Part No.
Passivated Stainless Steel
1059540-1
Passivated Stainless Steel
1059541-1
Passivated Stainless Steel
1058572-1
7.6
[.300]
Dia.
9.4 + 0.05
– 0.03 Dia.
[.368 + .002]
– .001
22.3
Ref.
[.878]
35.6 Max.
[1.400]
Cable
RG 174/U, 179,
187, 188, 316
Note: Part Numbers are RoHS
compliant except: Indicates
non-RoHS compliant.
Recommended
Mounting Hole
Plating
Part No.
Passivated Stainless Steel
1059551-1
Refer to Recommended Mounting Hole Detail for Semi-Rigid Cable Low
Profile Feedthrough Cable Jack.
Recommended removal tool part number 1059774-1 as described in the
Tooling Section of this catalog.
163
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
OSP Miniature Modular Blind Mate Connectors (Continued)
Panel Mount
Straight Terminal
2-Hole Flange Mount Plug
Receptacle
6.4
Dia.
[.250]
2.6
Dia. 12.2
[.102]
[.481]
2 Plcs.
1.3
.050 Dia.
15.9
[.625]
1.7
[.065]
4.1
Dia.
[.162]
9.9
[.390]
22.3
[.878]
2.6
Dia.
[.102]
2 Plcs.
15.9
[.625]
1.3 Dia.
[.050]
12.2
[.481]
4.1 Dia.
[.162]
27.4
[1.080]
4-Hole Flange Mount Plug
Receptacle
Part No.
1059566-1
6.6
[.260]
8.4
[.330]
2-Hole Flange Mount Jack
Receptacle
Plating
Passivated
Stainless
Steel
Plating
Passivated
Stainless
Steel
Part No.
1059596-1
7.6
[.300]
2.6
Dia.
[.102]
2 Plcs.
6.4 Dia.
[.250]
1.3 Dia.
[.050]
Plating
Passivated
Stainless
Steel
4.1 Dia.
[.162]
22.3
[.878]
12.7
[.500]
Sq.
4-Hole Flange Mount Jack
Receptacle
Part No.
1059563-1
8.6
[.340]
Typ.
2.6
Dia.
[.102]
2 Plcs.
Plating
Passivated
Stainless
Steel
1.3 Dia.
[.050]
27.4
[1.080]
4.1 Dia.
[.162]
12.7
[.500]
Sq.
Part No.
1059594-1
8.6
[.340]
Typ.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
164
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
OSP Miniature Modular Blind Mate Connectors (Continued)
Panel Mount (Continued)
Straight Terminal
Threaded Installation —
Panel Feedthrough Plug
Receptacle
1.6 Dia.
[.064]
0.5 Dia.
[.020]
1.7 ± 0.03 Dia.
[.066 ± .001]
5.5 ± 0.03 Dia.
[.218 ± .001]
5.3 Dia.
10.4
[.410] [.210]
5.3 ± 0.05
[.210 ± .002]
6.4
Panel
[.250]
Plating
Passivated
Stainless
Steel
Part No.
1059617-1
Recommended
Mounting Hole
Threaded Installation —
Panel Feedthrough Jack
Receptacle
1.6 Dia.
[.064]
5.5 ± 0.03 Dia.
[.218 ± .001]
5.3 Dia.
10.4
[.410] [.210]
5.3 ± 0.05
[.210 ± .002]
0.5 Dia.
[.020]
1.7 ± 0.03 Dia.
[.066 ± .001]
6.4
Panel
[.250]
Plating
Passivated
Stainless
Steel
Part No.
1059657-1
Recommended
Mounting Hole
Press Fit Installation —
Panel Feedthrough Plug
Receptacle
0.5 Dia.
[.020]
7.6 Dia.
[.300]
6.4 + 0.05
– .000 Dia.
[.253 + .002]
– .000
7.92
Dia.
[.312]
6.3 + .000
[.248
– 0.05 Dia.
+ .000]
– .002
6.4
[.250]
1.2 ± 0.03 Dia.
[.046 ± .001]
6.4 ± 0.03 Dia.
[.250 ± .001]
Plating
Passivated
Stainless
Steel
Part No.
1059651-1
Recommended
Mounting Hole
Press Fit Installation —
Panel Feedthrough Jack
Receptacle
0.5 Dia.
[.020]
7.6 Dia.
[.300]
6.4 + 0.05
– .000 Dia.
[.253 + .002]
– .000
6.3 + .000
6.4
– 0.05 Dia.
[.250]
[.248 + .000]
1.2 ± 0.03 Dia.
[.046 ± .001]
6.4 ± 0.03 Dia.
[.250 ± .001]
Plating
Passivated
Stainless
Steel
Part No.
1059654-1
– .002
Recommended
Mounting Hole
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
165
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
OSP Miniature Modular Blind Mate Connectors (Continued)
Printed Circuit Board Mount
Straight Plug Receptacle —
Captured Contact
1.7 + 0.08
– .000 Dia.
[.067 + .003] Hole Typ.
– .000
1.0 Sq.
[.040] 4 Plcs.
1.3 Dia.
[.050]
12.7
[.500]
5.1
[.200]
Typ.
6.4
[.250]
Sq.
5.1
[.200]
Typ.
Plating
Gold
Part No.
1059684-1
Plating
Gold
Part No.
1059681-1
Plating
Gold
Part No.
1059691-1
Plating
Gold
Part No.
1253111-1
Recommended
Mounting Hole
Straight Jack Receptacle —
Captured Contact
1.7 + 0.08
– .000 Dia.
[.067 + .003] Hole Typ.
5.1
[.200]
Typ.
9.5
[.375]
Dia.
13.5
[.530]
– .000
1.0 Sq.
[.040] 4 Plcs.
1.3 Dia.
[.050]
5.1
[.200]
Typ.
Recommended
Mounting Hole
Right-Angle Plug
Receptacle —
Captured Contact
13.5
[.530]
15.0
[.590]
Surface Mount
Vertical Plug with
Small Leg
O-Ring
– .000
1.0 Sq.
[.040] 4 Plcs.
1.3 Dia.
[.050]
9.4
[.372]
OSP
Plug
1.7 + 0.08
– .000 Dia.
[.067 + .003] Hole Typ.
5.1
[.200]
Typ.
6.4
[.250]
Sq.
Recommended
Mounting Hole
1.7 + 0.08
– .000 Dia.
[.067 + .003]
1.6 Sq.
[.062] 4 Plcs.
1.3 Dia.
6.4
[.050]
[.250]
Sq.
5.1
[.200]
Typ.
– .000
4.5
[.178]
Typ.
2.5 + 0.08 Dia. Hole
– .000
[.098 + .003] Typ.
– .000 4 Plcs.
4.5
[.178]
Typ.
Recommended
Mounting Hole
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
166
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
OSP Miniature Modular Blind Mate Connectors (Continued)
Hermetically Sealed
Metal-To-Metal
Rigid Gasket Seal —
Panel Feedthrough
Plug Receptacle
0.5
Dia.
[.020]
5.3
Dia.
[.210]
10.4
[.410]
VSWR
(GHz)
1.04 + .009f
RF Leakage
(dB)
–(90-fGHz)
Rigid
Gasket
1.6
[.064]
Dia.
Plating
Part No.
Passivated stainless steel
6059632-1
Installation Thermal Limit: 250°C.
Recommended Mounting Hole Detail A follows, pg 168.
Rigid Gasket Seal —
Panel Feedthrough
Jack Receptacle
0.5 Dia.
[.020]
11.2
[.450]
VSWR
(GHz)
1.04 + .009f
RF Leakage
(dB)
–(90-fGHz)
5.3 Dia.
[.210]
Rigid
Gasket
1.6
[.064]
Dia.
Plating
Part No.
Passivated stainless steel
6059665-1
Installation Thermal Limit: 250°C.
Recommended Mounting Hole Detail A follows, pg 168.
Field Replaceable
Solder and Braze-In
Panel Feedthrough Plug
Receptacle
5.3
Dia.
[.210]
9.9
[.390]
4.0 + 0.05
– 0.03 Dia.
[.158 + .002]
– .001
5.6 ± 0.13
[.220 ± .005]
0.5 ± 0.03 Dia.
[.020 ± .001]
Glass Seal
VSWR
(GHz)
1.06 + .01f
RF Leakage
(dB)
–(90-fGHz)
Plating
Part No.
Passivated stainless steel
1059637-1
Recommended Mounting Detail B or E follows, pg 168.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
167
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
OSP Miniature Modular Blind Mate Connectors (Continued)
Hermetically Sealed (Continued)
Field Replaceable
Solder and Braze-In
(Continued)
Panel Feedthrough Jack
Receptacle
4.0 + 0.05
– 0.03 Dia.
[.158 + .002]
– .001
5.6 ± 0.13
[.220 ± .005]
10.7
[.421]
VSWR
(GHz)
1.06 + .01f
0.5 ± 0.03 Dia.
[.020 ± .001]
Glass Seal
RF Leakage
(dB)
–(90-fGHz)
Plating
Part No.
Passivated stainless steel
1059671-1
Recommended Mounting Detail B or E follows at bottom of this page.
2-Hole Flange Mount Plug
Receptacle With EMI/RFI
Gasket — 0.5 [.018] Dia.
Contact
2.8 + 0.05
6.4
Dia.
[.250]
– 0.03
[.112 + .002]
– .001
2.6
Dia.
[.102]
2 Plcs.
15.9
[.625]
Dia.
12.2
[.481]
8.0 ± 0.13
[.315 ± .005]
9.5
[.375]
VSWR
(GHz)
1.06 + .01f
RF Leakage
(dB)
–(90-fGHz)
0.5 ± 0.03
[.018 ± .001]
Dia.
6.6
[.260]
Plating
Part No.
Passivated stainless steel
1059572-1
Recommended Mounting Detail D follows at bottom of this page.
Recommended
Mounting Hole Detail
Detail A*
5.5 ± 0.03
[.218 ± .001]
Dia.
Detail B* (6.35 [.250] Panel Thickness)
1.7 ± 0.03
[.066 ± .001]
Dia.
6.4
[.250]
Ref.
Panel
6.4 ± 0.08
[.250 ± .003]
Ref. Panel
Detail D*
Detail C*
3.2 ± 0.13
[.125 ± .005]
Panel
2.6 ± 0.03
[.102 ± .001]
Dia.
.000
4.1 +– 0.05
Dia.
.000
[.162 +– .002
]
5.5 ± 0.03
[.218 ± .001]
Dia.
Detail E*
3.2 ± 0.13
[.125 ± .005]
5.5 ± 0.03
[.218 ± .001]
Dia.
Panel
12.2
[.481]
Ref.
2.9 ± 0.03
[.115 ± .001]
Dia.
12.2
[.481]
Ref.
3.2 ± 0.03
[.125 ± .001]
.000
4.1 +– 0.03
7.6 ± 0.08
[.300 ± .003]
Ref. Panel
Dia.
.000
[.162 +– .001
]
*Consult appropriate Instruction Sheet for complete mounting details.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
168
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
OSSP Subminiature Modular Blind Mate Connectors
Product Facts
■
Subminiature version of
OSP Blind Mate Connectors
■
For space savings
■
Family of connectors and
adapters
OSSP connectors are a subminiature version of the OSP
blind mate series.
Connectors in this series
incorporate the design elements of the OSP interface
including the float and mismate features. OSSP blind
mates are about 40%
smaller than OSP connectors and are designed to be
Engineering Data
A complete family of OSSP
connectors and adapters is
available including cable
connectors, fixed and float
mount panel connectors
and hermetic connectors.
Rigid mount units will function to specifications up to
±.064 [±.0025] radial misalignment with the mating
plug connector.
Applications requiring
greater than ±.064 [±.0025]
radial misalignment can use
either the float design or
floating connector plates
with guide pins.
Mechanical
Impedance —
Frequency —
Temperature Rating —
50 ohms
dc to 28.0 GHz
-65° to 125° C
Electrical
RG 405 (.085) Semi-Rigid
VSWR —
RF Transmission Loss —
Insulation Resistance —
Contact Resistance —
Center Contact
Outer Contact
Outer Contact to Cable
Dielectric Withstanding Voltage —
Corona Extinction Voltage at 70,000 Ft.—
RF High Potential at 5 MHz —
RF Leakage Interface Only —
Power Handling —
1.05 + .01f (GHz)
-.040 x √ f (GHz)
5,000 megohms min.
Force to Engage —
Force to Disengage —
Center Contact Retention —
Durablilty —
Radial Misalignment —
Rigid Mount
Float Mount
3 pounds max.
1.5 pounds max.
4 pounds min.
1,000 Cycles
±.06 [±.0025]
±.51 [±.020]
Mating Characteristics
6.0 milliohms max.
3.0 milliohms max.
0.5 milliohms max.
675 volts RMS
250 volts min.
675 volts RMS
-(90-fGHz) dB min. (fully mated)
300W at 3 GHz (sea level) and room
temperature
Environmental
Corrosion —
Vibration —
Shock —
Temperature Cycling —
Moisture Resistance —
used in applications where
space is at a premium.
Method 101, Condition B, MIL-STD-202
Method 204, Condition D, 20G’s, MIL-STD-202
Method 213, Condition I, 100G’s, MIL-STD-202
Method 107, Condition B, MIL-STD-202
Method 106, MIL-STD-202
Jack Connector —
Center Contact Socket Oversize test Pin —
.533 + .003 [.0210 + .0001] dia.
Test Pin Finish —
16 micro inch max.
Insertion Depth —
.76/1.14 [.030/.045]
Number of Insertions — 3
Insertion Force
Test Pin —
.528 + .003 [.0208 + .0001] dia.
Test Pin Finish —
16 micro inch
Insertion Force —
3 pounds max.
Withdrawal Force
Test Pin —
.495 + .003 [.0195 - .0001] dia.
Test Pin Finish —
16 micro inch max.
Insertion Depth —
1.27/1.91 [.050/.075]
Withdrawal —
1/2 ounce min.
Finish
Center Contact —
Housing —
Gold plate per MIL-G-45204, Type II, Class 0 over nickel
plate per QQ-N-290, Class 2 or passivate per ASTM-A380
Gold plate per MIL-G-45204, Type II, Class 0 over nickel
plate per QQ-N-290, Class 2 or passivate per ASTM-A380
Material
Housing —
Center Contact —
Dielectric —
Gasket (O’Ring) —
Corrosion resistant steel Type 303 (stainless) per
ASTM A484 and A582
Beryllium copper per ASTM-B-196
TFE fluorocarbon per ASTM-D-1457
MIL-P-25732
169
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
OSSP Subminiature Modular Blind Mate Connectors (Continued)
Interface Mating
Dimensions
The connector interface,
specifically designed for
multiple interconnects,
maintains reliable performance over the typical
mechanical tolerance
required in cost effective
packaging.
The interface test data
shows excellent performance is maintained with mating gaps up to .015 inch.
Jack
Description
A
1.22 Nom.
0.48
1.22 Nom.
0.48
Jack
Plug
Plug
B
3.91 Min.
.154
3.56
.140 Nom.
Dimensions
C
D
5.33 Ref.
5.00 Nom.*
.210
.197
5.33 Ref.
5.00
.210
.199 Min.
E
3.35 Max.
.132
0.51
.020 Nom.
F
3.23 Max.*
.127
3.25
.128 Min.
*With spring bottomed.
170
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
OSSP Subminiature Modular Blind Mate Connectors (Continued)
For Semi-Rigid Cable, Direct Solder Attachment
Bulkhead Feedthrough
Cable Plug — Rear Mount
2.3
Dia. Min.
[.089]
4.6 ± 0.03 Dia.
[.180 ± .001]
17.5
[.690]
d
e
3.0
Dia.
[.120]
Cable
RG 405/U,
2.16
[.085]
Flange Mount Cable Jack —
Floating Rear Mount
0.08
7.1 +– 0.00
Dia.
+ .003 ]
[.281 – .000
3.0 Dia.
[.120]
[.
7.3
Max.
[.289]
0.03
4.6 +– .000
Dia.
.001 ]
[ .182 +– .000
Recommended
Mounting Hole
Plating
Part No.
Gold
1059857-1
2.4 Dia.
[.093] 2 Plcs.
14.7
Dia.
[.580]
11.0 ± 0.10
[.435 ± .004]
0.08
7.1 +– 0.00
Dia.
+ .003 ]
[.281 – .000
11.0
[.435]
0.00
7.1 +– 0.05
Dia.
+ .000
[.280 – .002 ]
18.0
[.710]
5.5
[.217]
2.3
[.089]
Dia.
7.6
[.300]
ded
ole
Cable
RG 405/U,
2.16
[.085]
0.00
7.1 +– 0.05
Dia.
+ .000
[.280 – .002 ]
Recommended
Mounting Hole
Part No.
1059868-1
Finish: Inner housing that is soldered to cable is gold plated. Outer housing
is passivated stainless steel.
When using semi-rigid cable, it is recommended that a service loop be used
to facilitate the float features of the connector.
Feedthrough Snap-In
0.08
7.1 +– 0.00
+ .003
[.280 – .000 ]
12.7
Ref.
[.500]
11.4
Ref.
[.450]
0.05
6.5 +– 0.00
+ .002 Dia.
[.256 – .000 ]
18.0
[.710]
14.7
[.570]
Compression
Spring
6.1 Dia.
Connector
[.240]
Retaining Clip
7.6 Dia.
[.300] Max.
3.0 Dia.
[.120]
Cable
RG 405/U,
2.16
[.085]
Part No.
1059874-1
Recommended
Mounting Hole
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
171
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
OSSP Subminiature Modular Blind Mate Connectors (Continued)
For Flexible Cable, Crimp Attachment
Bulkhead Feedthrough
Cable Plug — Rear Mount
4.6 ± 0.03 Dia.
[.180 ± .001]
4
[.1
0.03
4.6 +– .000
Dia.
+ .001
[.182 – .000 ]
33.0
Ref.
[1.298]
d
Recommended
Mounting Hole
Cable
RG 188/U,
316 Double
Braided Only
RG 174/U,
188/U, 316U
Flange Mount
Cable Jack —
Floating Rear Mount
Plating
Part No.
Passivated Stainless Steel
1059884-1
Passivated Stainless Steel
1059886-1
2.4 Dia.
[.093] 2 Plcs.
0.08
.1 +– 0.00
Dia.
+ .003
81 – .000 ]
14.7
Dia.
[.580]
11.0 ± 0.10
[.435 ± .004]
0.08
7.1 +– 0.00
Dia.
+ .003
[.281 – .000 ]
11.0
[.435]
0.00
7.1 +– 0.05
Dia.
35.6
[1.40]
Max.
+ .000
[.280 – .002 ]
7.6
[.300]
Cable
RG 188/U,
316 Double
Braided Only
RG 174/U,
188/U, 316U
Feedthrough Snap-In
Cable Jack
0.08
7.1 +– 0.00
+ .003 Dia.
[.280 – .000 ]
Mounting Hole 6.1
Dia.
[.240]
OSSP
Jack
0.00
7.1 +– 0.05
D
5.5
[.217]
+ .000
[.280 – .002 ]
Recommended
Mounting Hole
Plating
Part No.
Passivated Stainless Steel
1059888-1
Passivated Stainless Steel
1059887-1
35.6
Max.
[1.400]
22.4 ± 0.38
[.880 ± .015]
Compression
Spring
0.05
6.5 +– 0.00
+ .002 Dia.
[.256 – .000 ]
Mounting Hole
Part No.
1059889-1
Connector
Retaining Clip
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
172
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
OSSP Subminiature Modular Blind Mate Connectors (Continued)
For Panel Mount
Threaded Panel
Feedthrough Plug
Receptacle, Straight
Terminal
0.4 Dia.
[.015]
11.4
[.450]
4.0 Dia.
[.156]
4.1 ± 0.03 Dia.
[.162 ± .001]
5.3 ± 0.05
[.210 ± .002]
1.2 Dia.
[.049]
1.3 ± 0.03 Dia.
[.051 ± .001]
Plating
Passivated
Stainless
Steel
6.4
[.250]
Part No.
1059903-1
Recommended
Mounting Hole
Press-Fit Panel
Feedthrough Plug
Receptacle
0.08
Ø 4.0 +– 0.00
+ .003
[.159 – .000 ]
Straight Knurl
0.05
11.4 +– 0.00
+ .002
[.450 – .000 ]
5.1
[.200]
6.4
[.250]
5.3 ± 0.05
[.210 ± .002]
Ø 4.0 ± 0.03
[.156 ± .001]
OSSP
Plug
O-Ring
Ø 0.4 ± 0.03
[.015 ± .001]
Part No.
1059901-1
Ø 0.9 ± 0.03
[.034 ± .001]
Ø 3.9
[.154
+ 0.00
– 0.05
+ .000
– .002 ]
Recommended
Mounting Hole
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
173
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
OSSP Subminiature Modular Blind Mate Connectors (Continued)
For Printed Circuit Board Mount
Straight Plug Receptacle —
Captured Contact
8.7
[.343]
OSSP
Plug
12.6
[.498]
6.4
[.250]
Sq.
Mounting
Surface
5.1
[.200]
5.1
Typ.
[.200]
0.08
Ø 1.7 +– 0.00
Hole
+ .003
[.067 – .000 ] Typ.
5 Plcs.
5.1
[.200]
Ø 0.9
[.034]
O-Ring
1.0 Sq.
[.040] Typ.
4 Plcs.
Recommended
Mounting Hole
Part No.
1059919-1
Right-Angle
Plug Receptacle
5.84
[.230]
5.08 ± 0.51
[.200 ± .020]
6.35
[.250]
Sq.
5.08
Typ.
[.200]
5.08
[.200]
Typ.
0.08
Ø 1.7 +– 0.00
Hole
+ .003
[.067 – .000 ] Typ.
5 Plcs.
5.08
[.200]
17.78 ± 0.25
[.700 ± .010]
Ø 0.86
[.034]
14.61
[.575]
O-Ring
1.02 Sq.
[.040]
4 Plcs.
Recommended
Mounting Hole
5.11 ± 0.03
[.201 ± .001]
Part Number
1484546-1
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
174
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
OSSP Subminiature Modular Blind Mate Connectors (Continued)
Hermetically Sealed
Metal to Metal
Formable Gasket —
Panel Feedthrough Plug
Receptacle
1.0 Dia.
[.039]
3.6 Dia.
[.140]
12.1
[.475]
VSWR
(GHz)
1.06 + .01f
3.0
Dia.
[.118]
.03
Dia.
[.012]
RF Leakage
(dB)
–(85-fGHz)
Plating
Part No.
Gold
1059905-1
Recommended Mounting Hole Detail A at bottom of this page.
0.00
4.8 +– 0.05
Dia.
Solder and Braze-In
Panel Feedthrough Plug
Receptacle
5.3
Dia.
[.210]
+ .000
[.189 – .002 ]
8.2
[.322]
Ref.
VSWR
(GHz)
1.06 + .01f
0.5 ± 0.03 Dia.
[.020 ± .001]
RF Leakage
(dB)
–(85-fGHz)
Plating
Part No.
Gold
1059902-1
Recommended Mounting Hole Detail B at bottom of this page.
Field Replaceable
Solder and Braze-In
2-Hole Flange Mount
Plug Receptacle With
EMI/RFI Gasket
1.9 + 0.05
– 0.03
[.076 + .002]
– .001
5.3
Dia.
[.210]
2.4 Dia.
[.093] 2 Plcs.
Dia.
12.2
Dia.
[.480]
9.0
[.353]
9.5
[.375]
VSWR
(GHz)
1.06 + .01f
8.2 ± 0.13
[.322 ± .005]
RF Leakage
(dB)
–(85-fGHz)
0.3 ± 0.03
[.012 ± .001]
Dia.
5.7
[.223]
Plating
Part No.
Passivated Stainless Steel
1059894-1
Recommended Mounting Hole Detail C at bottom of this page.
Recommended
Mounting Hole Detail for
Hermetically Sealed
Detail A*
.003
4.1 +– 0.05
3.2 ± 0.03
[.121 ± .001]
Detail C*
2.5
[.100]
0.08
0.8 +– 0.00
.000
1.0 +– 0.03
+ .000 Dia.
.001 Dia. [.041 – .001 ]
]
[.162 +– .002
6.4
[.250]
Ref.
Note: Part Numbers are RoHS
compliant except: Indicates
non-RoHS compliant.
Detail B*
+ .003
[.031 – .000 ]
R 0.08
Max.
[.003]
0.08
R 0.13 +– 0.03
+ .003
[.005 – .001 ]
Dia.
0.05
Ø 5.5 +– 0.03
+ .002
[.218 – .001 ]
3.2 ± 0.13
[.125 ± .005]
Panel
2.0 ± 0.03
[.078 ± .001]
Dia.
9.0
[.353]
Ref.
0.03
Ø 4.8 +– 0.00
+ .001
[.190 – .000 ]
*Consult appropriate Instruction Sheet for complete mounting procedure.
175
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
工商网监
湘ICP备2023018690号
